l Customisable Graphical screen prompts
l Touch screen interface
l Dual and automatic pressure regulation options
l Leak sensitivity down to 0.1 Pa or 0.01 ml/min
l Programmable electrical and pneumatic outputs
l 泄漏灵敏度低至0.1 Pa或0.01 ml / min
The FCO770 is the latest high specification leak detector from Furness Controls and builds on the highly successful FCO750。 Suitable for bench-top mounting or integration into automated assembly fixtures, the FCO770 offers a touchscreen graphical interface to combine great functionality with simplicity of use。
Graphical Colour Display
The graphical display allows the operator to have product images and screen prompts to assist in the test cycle. Live graphs of the test cycle can be seen and are stored automatically for easy recall.
User programmable electrical and pneumatic inputs and outputs
The FCO770's flexibility has been improved still further with the development of programmable inputs and outputs, maintenance early warning systems (MEWS) and the inclusion of programmable pneumatic outputs. Programmable I/O can negate the requirement for PLC controls, reducing test station costs and complexity. With various logic functions and timers, the FCO770 offers a perfect platform for cost effective test station requirements.
通过开发可编程输入和输出，维护预警系统（MEWS）以及包含可编程气动输出,FCO770的灵活性得到了进一步提高。可编程I / O可以抵消PLC控制的要求,降低测试站的成本和复杂性。凭借各种逻辑功能和定时器,FCO770为经济高效的测试站要求提供了完美的平台。
Multiple communication options
In addition to the RS232, RS485, Ethernet and USB type B ports that the FCO750 offers, the FCO770 also has two USB type A ports for connection of peripheral devices such as a USB memory stick and a mouse. A second Ethernet port allows direct access to logged results and a VGA connector allows connection of a remote display.
除了FCO750提供的RS232,RS485，以太网和USB B型端口外，FCO770还具有两个USB A型端口，用于连接外围设备，如USB记忆棒和鼠标。第二个以太网端口允许直接访问记录的结果，VGA连接器允许连接远程显示器。
The built-in datalogger stores not only the test results but also the pressure profile for each test, allowing for in-depth analysis of all test results. Results can be saved to a memory stick for transfer to a PC.
Direct barcode interface
Barcode product selection has until now, required PC's, PLC's or additional hardware to utilise this effective feature. As a result, its use has been restricted to predominantly large scale automated assembly fixtures. Following requests by our customers and World Wide Agents, Furness Controls have included the facility to read both 1D and 2D barcodes directly into the FCO770. Using the Barcode feature, specific product test parameters can be quickly and easily selected simply by scanning the code directly from a product or via a pick list. Product selection is straightforward and simple with the chance of operator error being significantly reduced. This impressive feature has been improved still further with the inclusion of serial number scanning. Leak test results can now be stored against a products unique serial number within the FCO770, both improving and simplifying product traceability.